RAID
PHALANX systems feature Fibre Channel and Ultra SCSI host interfaces with selectable RAID levels 0, 1, 0+1, 3, 4 and 5 with multiple dimensional configuration. All units have split backplanes for multiple host configurations. PHALANX "R" Series (7"/4U panel height Rackmount Units) (21" Deep w/o cover)
• 3U Ruggedized Dual Port Fibre Channel RAID System
• Single Active (Dual Active, Failover/Failback option) Controller
• Two 4Gb/sec Fibre Channel Ports
• Sustained Data Rates to 4Gb/sec
• Battery Free Cache Backup
• Enclosed and Electrically Isolated Hot-Swap Drive Canisters
• Operational Altitude to 45,000 ft
• Operational Temperature -20° to 60° C
• 40 to 440Hz, 90/240 VAC Input Operation
• Slide Mountable
• Windows, Linux and Unix Support (Cluster Certified)
• Redundant, Hot-Swap Components/FRUs
• Management GUI and Failover Software
• Very Cool Operation - Less than 10°F Max. Temp. Rise
• Optional Transit/Op Case
• Made in USA
• Host Operating System Independent
• 4GB/sec FC, Ultra320 SCSI Interfaces
• MIL-STD-901 D Certified
• Redundant System Components
• Multiple Host Channels
• Host LUN Mapping
• On-line RAID Expansion
• Rebuild Priority Tunable
• Firmware-embedded GUI Administration
• Real-time Event Notification
• Dedicated and Global Spare HDD Support
• The best end-to-end I/O performance in a RAID5 configuration:
Sequential Reads:
780MBps
Sequential Writes:
521MBps
• 2U, 12-bay, single or redundant RAID controller subsystem
• Two (2) FC-4G host channels on each controller
• Supports a combination of up to twelve (12) SAS 3Gb and/or SATAII disk drives
• Supports up to 2GB DDR cache memory per controller
• Supports RAID levels 0, 1(0+1), 3, 5, 6, 10, 30, 50 and 60
• Hot-swappable battery backup units (BBUs) for memory data protection
• Effortless management through the LCD keypad, RS-232C terminal, or Java-based RAIDWatch* manager over the Internet
• Two SCSI-320 Host Channels; Transfer rate up to 160 MB/sec for each channel
• Two SCSI-320 Drive Channels; each channel attached to six drives. Transfer rate up to 160MB/sec for each channel
• Multiple Logical Drive configurations, each with a different RAID level
• Auto detection, auto rebuild, hot-spare, and hotswappable
• LUN Filtering RAID-based and centralized access management in SAN
• Intelligent Drive Handling for managing bad blocks during rebuild and the manual Media Scan function for data maintenance
Environmental:
Temperature:
0 C to 50 C Operating, -25 C to 50 C Non-operating
Humidity:
0% to 95% Non-condensing
Altitude:
0 to 10,000 ft Operating, 0 to 30,000 ft Non-operating
• End-to-end I/O performance in RAID 5 configuration:
Sequential Reads:
510 MB/s
Sequential Writes:
350 MB/s
• Two (2) Fibre host channels; transfer rate up to 400MBps per channel
• Accommodates sixteen (16) of the latest 3Gbps, SATA-II disk drives; backward compatible with SATA-I drives
• Highest fault tolerance with RAID 6 configuration
• Support up to 2GB DDR RAM DIMM modules
• Highest density in a 3U chassis supporting up to 6.4TB storage capacity
• Optional hot-swappable battery backup units (BBUs)
• Dual-speed fans to reduce system noise and power consumption
PSS-3
The versatile PSS3 allows many different configurations of
storage devices including:
• Hard Disk Drives
• CD/DVD
• Magneto-Optical
• DAT
• AIT Tape Devices
• Solid State Flash Drives
• RAID
FEATURES
• Supports up to 3ea U320 SCSI-4 devices
• 2U (3.5") rackmount panel height
• All steel construction
• Keylock "Soft" power (no power spikes)
• Hot Swap device carrier/ receivers